Professional slip ring manufacturer

Jarch Inc.-mall

Global Hotline

Info@szjarch.cn +86137-1425-1726
search
Aggregate reading:about“

slip ring

”The latest news

The slip ring is used to help the rotating equipment to rotate, transmit the current signal to the rotating equipment, and help to transmit power. The function of conductive slip ring is obvious. With more and more devices using conductive rings, the requirements for the quality of conductive rings are getting higher and higher. Therefore, we choose manufacturers with high scientific and technological content to produce products of various specifications. JARCH is a professional manufacturer of conductive slip rings, which can help customers choose the most suitable solution for customers.

The slip ring is a very mature product. Factory products of general quality can provide stable products, but the wrong parameters given by customers will also lead to many problems.

The slip ring can rotate 360 degrees, and can also transmit current and signals. Therefore, the conductive slip ring is used in many places. We do not know about it in the process of use, and it is easy to encounter some problems, such as how to wire the conductive slip ring.

As an indispensable electrical component in modern automation equipment, conductive slip rings are also widely used in all walks of life. Because of the particularity of the conductive slip ring, the manufacturers of automation equipment need to purchase the conductive slip ring after the failure of the conductive slip ring.

The conductive slip ring can transmit various currents and control signals at the same time of 360 degree rotation, and can ensure that the stage light can rotate and the light on it can be switched freely.

The conductive slip ring usually refers to the conductive slip ring with a single current of more than 50A. Because the current transmitted by this type of conductive slip ring is too large, it is different from the conventional conductive slip ring in many places. Because the transmission device is a large current conductive device, the contact between the contact material and the brush should be considered first to ensure the reliability and life of the large current conductive ring contact.

Message prompts

Close